New Fabrication Machines

	The below HM products are in stock; however as agents & stockists we can quote anything from the main catalogue please e-mail us for a quote and delivery.
	HM mechanical guillotine model JBS, c/w manual back gauge, cutting line lighting, mobile foot switch, front supports, automatic rubber coated sheet hold down unit, 1270mm x 3mm capacity. £7395
	H M Manual box & pan folding machine, Model HS-3S, 1270mm x 2mm capacity segmented clamping beam, foot operated material clamping for quick and safe operation leaving both hands free to position the work piece. £1977
	H M initial pinch bending rolls model TTA 12/12, 1285 x 1.25 mm capacity, 60/65 mm dia rolls, top slip roll. £1995
	HM TAS 75 Belt Grinder, 75 x 2000 mm belt, 4 hp motor, 34 m/sec belt speed, contact wheel or flat grinding area. £895 HM TAS 150 Belt grinder, 150 x 2000 mm belt, 4 hp motor, 34 m/sec belt speed, contact wheel or flat grinding area. £1195. Dust extraction to suit £410
	HM H.M ZP 45 tube deburring, 250 x 45 mm wire brush, 3 HP motor, two speed 1400/2800 rpm, supports for round & square tubes included, deburring inside & outside. £1715. Dust extraction to suit. £410
	UK built dry dust extraction unit, 3 hp motor, 150mm inlet, approximate size 700mm x 700mm x 1935mm, 700-1200 cfm, 3 phase. Complete with explosion relief panel & blast barrier as standard, large filter area, low noise with additional noise reducing attenuator available, quick release dust box at the base. POA
	UK built dry dust extraction unit, 1.5 hp motor, standard 100mm inlet, approximate size 600mm x 780mm x 875mm, 250-400 cfm, 3 or 1 phase. Complete with explosion relief & blast barrier as standard, ideal when linishing aluminum. As the photograph shows small grinding and polishing machines can be mounted on top of the unit or the unit can sit behind a machine such as Jones & shipman 540 grinding m/c. POA