CENTRE LATHES

T3114; SWIFT 12V6, gap bed, 28” swing x 80” between centres, 42” swing in gap, 13.5 – 630 rpm spindle speeds, 3 ¾ “ spindle bore, 30” four jaw chuck, 24” & 30” faceplates, 2 & 3 point steadies.  £POA

T3115; HARRISON M300, gap bed centre lathe, 13” swing x 40” between centres, 3 & 4 jaw chucks, quick change toolpost, coolant and guards, good condition. £3250

H3113; HARRISON M400, straight bed centre lathe, 16” swing x 80” between centres, 3 chuck, four way toolpost, 40 - -2000 rpm , coolant and guards.    £3950

H3111; HARRISON M400, straight bed centre lathe, 16” swing x 40” between centres, 3 & 4 jaw chucks, four way toolpost, 40 - -2000 rpm , coolant and guards. £3950

DRILLING MACHINES.

T1112; FOBCO 7/8 floor drill, 2 m/t spindle, 51 – 2650 rpm, 15” x 18” table, 10” throat, Good condition. £750

S1111; HERBERT, floor drill, 1 morse taper spindle, four speed. £125

U1102; STEINEL 2 x head high speed drilling machines, 1000 – 11200 rpm spindle speeds, 0 –5 mm keyless chucks, 27” x 6” table, 3 phase.£325

GRINDING MACHINES

T5614; LUMSDEN 91ML, vertical spindle grinding machine, 36” table, 22” segmented wheel, 11” max height capacity, 1977 machine, good condition.    £6950

T5612; JONES & SHIPMAN 1011 surface grinding machine, 27” x 12” capacity, 12” under wheel, standard grinding wheel 10” x 2” x 3” bore, magnetic chuck, coolant unit, good condition. SOLD

H5609; XYZ 1632 surface grinding machine, capacity 860mm x 406mm, max from table surface to spindle 558 mm, 355mm x 50mm wheel, 5 hp spindle drive, magnetic chuck, dust, 1997 m/c, excellent condition.     £7950

H5610; JONES & SHIPMAN 1400L, surface grinding machine, 24” x 8” magnetic chuck, extra height, coolant, 1980 machine, good condition.   £6950

T5613; JONES & SHIPMAN 540 surface grinding machine, magnetic chuck, dust unit, 1988 machine, good condition.  £3250

MILLING MACHINES

T7146; HECKERT FSS400, vertical milling machine, 20” x 71” table, 50 int spindle, tilting head, 45 – 1800 rpm, 1980 machine. £3750

H7145; BRIDGEPORT INTERACT 1 MK2, table 1065 mm x 410 mm, travel X=457 mm Y= 305 mm Z= 125 mm, Heidenhain 370 control, 30 int spindle, 4000 rpm, 2.2 kw motor, tooling, table guards, 1995 machine.       £8950

H7138; BRIDGEPORT BR2J2, turret milling machine, 48” x 9” table with power feed and rapids, variable speed 50 – 3750 rpm, two axis SONY digital read out, chrome slides. 1990 machine.  SOLD

T7147; BRIDGEPORT BJ2, turret milling machine, belt change head, 67-4600rpm (16), 42” x 9” table, power feed long, 1978 machine, good condition. £2250

H7144; KRV2000, turret milling machine, 48” x 10” table power feed and rapids long, R8 spindle, variable speed head, Two axis digital readout, 1992 machine.  £2850

POWER PRESSES

U1821; BRUDERER BSTA 25H, high speed precision stamping press, 25 ton capacity, 4-pillar design, bed area 540 x 530 mm, single roll feed BBV 202/120 on left side, adjustable stoke.    POA

H1823; HARE 5BS, 7.5 ton hydraulic press, 298 mm x 457 mm T slotted table, on large stand. Excellent  condition.   £1750

SAWING MACHINES

U7107; BIRKETT CUTMASTER laboratory abrasive cut-off machine, model Aquacut, manual down feed, spring balanced hood with safety glass window, T slotted table for direct mounting, vice for small samples, 5.5 kw main motor, 355 mm blade, 1700 rpm spindle speed, coolant, excellent condition.        £1750

F6107; EISELE VMS 370 PV, semi-automatic vertical action circular saw, 370 mm blade, two speed, capacity 130 mm round, 210 x 110 mm rectangle 120 mm box, coolant, good condition, 1994 machine.   £1250

H7109; STARTRITE 20V vertical bandsaw, 21” throat, 10” under guides, 10 speed, fitted welding attachment, As new never, been used.         £3950

H7110; STEIN 315 circular cut off saw, 315mm x 2.5mm x 40mm blade, 110mm round capacity, two speed,  coolant and guards, As new, Never been used.     £1500

H7113; PROSAW EU250, 10” capacity horizontal bandsaw, belt change, 65 – 314 ft/min, coolant and guards, quick action vice, 3 phase.   £1250

MISCELANEOUS

H7114; EDWARDS PEARSON hydraulic guillotine, 2500 x 4 mm capacity, blade adjustment, power back gauge, front supports, foot switch.   £5950

H7112; MORGAN-RUSHWORTH PB2604, hydraulic upstroke press-brake, 2600 mm x 50 ton capacity, inside length 2050, standard stroke 120 mm, front operated power backgauge, European style tool holders, rear guard, footswitch, light guards, 1998 machine, excellent condition.   £7950

T7115; BRIDGEPORT slotting head, good condition.   £750

S7107; RJH CHAMOIS polisher, .7 kW, single phase, 2002 machine, as new. £725

Double-click to edit text, or drag to move.

Used Machines in Stock

Click on stock number for picture

All prices plus VAT

Delivery ex-stock Loaded FOC

Inspection by appointment