Used Drilling machines
 |
RICHMOND ENVOY 4’6” radial drilling machine, 5 m/t spindle, 40-1850 rpm, box table, DC brake, elevating arm, coolant, good condition. Choice of machines. £3950 |
|---|---|
 |
POLLARD 150A, four spindle, 3 m/t spindles, 2 x power down feed, 2 x sensitive feed, 1sp 55-1210 rpm, 3sp 86-1920 rpm, coolant, chuck guards, good condition. £2850 |
 |
POLLARD 130A, Floor drilling machine, 2 m/t spindle, 226 – 2920 rpm spindle speeds, 11” throat, 16”x x132 table. DC brake, good condition. £1450 |
 |
POLLARD, six spindle drilling m/c, 2 m/t spindles, sensitive hand feed to all, 2 x spindles 111 – 2945 (8)rpm, 4 x spindles 106 – 1460 (8) rpm.POA |
 |
ABOGA Floor drilling machine, 3 m/t spindle, 200 – 3500 rpm, geared headstock, 9 inch throat, 19” square table, sensitive hand feed, good condition. £750 |
 |
FOBCO 7/8 FLOOR DRILL, 2 m/t spindle, 51 – 2650 rpm, 11 inch throat, 15” x 18” table, good condition. £695 |
 |
FOBCO1/2 INCH, floor drilling machine, 475 – 4260 rpm, 3 phase. £295 |
 |
FOBCO ½ INCH, bench drilling machine, 475 – 4260 rpm, 3 phase. £250 |
 |
HULLER UG12 tapping machine, 8mm capacity, two spindle tapping attachment fitted, foot switch, 1994 machine. £1250 |